TKF-I Series In-Line Pumps

Discharge Flange : DN 65 – DN 250
Capacity : 500 m³/h
Head : 100 m
Frequency : Three-phase 50 Hz – 60 Hz*
Temperature of Pumped Liquid : From -25 ˚C to+140 ˚C
Maximum Operating Pressure : 10 bar (16 bar)*


-Single-stage, closed impeller monoblock centrifugal pumps with volute, which can be connected to straight pipe (line type).
-Suction and discharge flanges conform to TS EN 1092-2 / PN 16. For pumps with steel or stainless steel housing, the flanges comply with TS EN 1092 – 1 / PN 16. It can be produced with ANSI / ASME flange upon request.
-Pumps are used with high efficiency electric motors according to IEC construction sizes.
-All impellers are balanced dynamically or statically in accordance with ISO 1940 class 6.3.
-Axial force is balanced with impeller balancing holes system.
-Optionally, pumps can be manufactured with wear ring and / or shaft bushing.
-The direction of rotation is clockwise when viewed from the motor side.
-The pump shaft is connected to the motor shaft by means of a shaft or rigid coupling and the axial and radial forces of the pump are compensated by the motor bearings.


-Agricultural Irrigation and Drainage
-Water Treatment and Pressurization
-Heating, Ventilating and Air Conditioning
-Food and Beverage Industry
-Building System